Release Number 3.0.15 [07/04/2009] - Maintenance Release

Corrections and Enhancements for this Release

CServer 3.0.15:

• This version fixes a potential stability issue related to the reconstruction of a count via the transaction log. This problem applies to specific cases where a count being activated requires reconstruction after an unexpected shutdown of CServer and where the count was previously imported into CServer.
• This version of CServer will now request user confirmation before any count reconstruction is performed by CServer, due to CServer failure.
• This version of CServer prevents any codeset, attached to an active count, from being logged in the transaction log. This will result in any reconstructed count, which previously had a codeset on a count before reconstruction, to have the same codeset on the count after reconstruction.
• This version of CServer fixes a Vista compatability issue by storing all resources in the currect user directory.
• This version of CServer stores all core system resources (users, licenses, etc...) in their own resource manager. These resources can now be accessed and viewed separately from other resources under a new Core Resource View menu selection.

iCounterCE (all platforms) 3.0.15:

• No changes.

iCounterXP 3.0.15:

• Temporary data is now stored in the current user directory.

iReporter 3.0.15:

• No changes.

Limitations in this release

Release Number 3.0.11 [05/17/2009] - CServer Hot Fix

Corrections and Enhancements for this Release

CServer 3.0.11:

• Fix for CServer crash when editing a count or profile without a codeset.
• Added the ability to change the default resource directory.
• New installations will use default "Documents and Settings" directory for resource storage as opposed to install directory.

Release Number 3.0.9 [02/27/2009] - Major Release

Corrections and Enhancements for this Release

CServer 3.0.9:

• New report template for variance by location is added (ID#178).
• Added ability to replace entered cost with cost from code lookup (ID#180).
• Refresh of visual data on master not refreshing properly (ID#168).
• Added a new default data view, which allows viewing of all fields for different item data simultaneously (ID#181).
• Added the ability to specify quantity and dollar count limits for each user (ID#182).
• The IPAddress is now displayed in the status bar. In cases where there are multiple IPAddresses, all are displayed in a hint box when the mouse is dragged over the IPAddress in the status bar. (ID#183).
• Total Quantity and Total Codes statistics are now displayed in the status bar of each count window. (ID#184).
• Added the ability to alphabetize resources by clicking resource column (ID#169).
• Added support for query by department (ID#185).
• Added a new key for key mapping which supports entering a code with one key press (ID#167).
• Support for downloading code set information to device (ID#191).

iCounterCE (all platforms) 3.0.9:

• Support for MC3000 CE 4.2 has been added (ID#176)
• Support for MC3000 CE 5.0 has been added (ID#177)
• Added quantity and dollar count limits checks (ID#182).
• Added the ability to enter a code with one key press (ID#167).
• Error message generation for not on file codes when enabled on server (ID#191).
• Support for missed place stock error reporting on CE device when enabled on server(ID#192).

iCounterXP 3.0.9:

• Added quantity and dollar count limits checks (ID#182).

iReporter 3.0.9:

• Support for new variance by location (ID#178).
• Added barcode field to code lookup reports (ID#179).
• New aggregate cost report added to allow reporting of barcode items by linked department. Aggregate item costing, allows multiple costs to be associated with a single scan and then linked to multiple departments (ID#193).

Limitations in this release

• 3.0.9 server and clients must be used to together. 2.x clients are not supported with 3.0.9 Cserver. Additionally, automatic updates from 2.x clients with 3.0.9 CServer will not work. Therefore, a manual install of iCounterCE is required for all devices. This limitation will not impact backward data computability in ibAcus. This change was necessary to enhance data propagation between CServer and icounter.

Release Number 2.5.5 [02/29/2008] - Minor update

Corrections and Enhancements for this Release

CServer 2.5.5:

• Two new report templates are added (ID#164):
  • Variance report - showing the difference between what was counted and what is in the codeset.
  • Misplaced stock report - showing items that were found in a location different than indicated in the codeset.
• Defining locations no longer causes all existing sections and shelves to be removed (ID#146).
• Support for automatic locations generation (ID#165):
  • Locations can be generated automatically from codesets that contain the location names.
  • These locations are stored as a separate resource and can be applied to any profile.
  • This is very useful for sites with large numbes of locations.

iCounterCE (all platforms) 2.5.5:

• No changes.

iCounterXP 2.5.5:

• No changes.

iReporter 2.5.5:

• No changes.

Release Number 2.5.4 [02/14/2008] – Minor update

Corrections and Enhancements for this Release

CServer 2.5.4:

• Duplicate section numbers can no longer be added to a location (ID#147).
• Duplicate location numbers or names can no longer be added to a site (ID#148).

iCounterCE (all platforms) 2.5.4:

• No changes.

iCounterXP 2.5.4:

• No changes.

iReporter 2.5.4:

• Support for new reporting template for variance report by location (ID#162).
• Support for new reporting template for misplaced stock report by location (ID#163).

Release Number 2.5.3 [02/07/2008] – Minor update

Corrections and Enhancements for this Release

CServer 2.5.3:

• Fixed duplication of users caused by closing the users window with X or Ctl-F4 (ID#130).
• The addition of new key map keys: alpha keys and selection of location by name (ID#140).
• Both UPCE and UPCA are matched in codesets when UPCE is scanned (ID#150).
• Ability to search for codes that were scanned during a count but are missing from the codeset (ID#151).

iCounterCE (all platforms) 2.5.3:

• The ability to select location by name (ID#140).

iCounterXP 2.5.3:

• No changes.

iReporter 2.5.3:

• Fixed the incorrect export of codes (ID#149).
• Both UPCE and UPCA are matched in codesets when UPCE is scanned (ID#150).

Release Number 2.5.2 [12/17/2007] – Major update

Corrections and Enhancements for this Release

CServer 2.5.2:

• Fixed missing code set resource type for code sets in CServer resource view (ID#108).
• Added the ability to create an irpt files from CServer without opening iReporter (ID#93).
• Fixed cancel button in script window from being partly covered if window is narrowed (ID#111).
• Support for transaction logging on count resources (ID#113).
• Support of fractional quantities (ID#121).
• Support for linked departments with split fractional (ID#121).
• Support for linking a specific department to a lookup code (ID#136).
• Merging of two code sets from oldest to newest (ID#124).
• IReporter files are now compressed by default (|ID#125).
• Support for attaching generalized reporting templates to profiles and counts (ID#137).
• Individual data items can now only be removed or changed from the master or from a query result window which was run on the master. Additionally, changes to the query result items, will result in the item in the master being changed (ID#135).

iCounterCE (all platforms) 2.5.2:

• Support for scanning with “One Button Predictive” count mode (ID#139).

iCounterXP 2.5.2:

• No changes.

iReporter 2.5.2:

• Support for generalized reporting templates (ID#94).
• Editing of margins can now be performed with a count in any pane (ID#137).
• Locations names on some reports were being truncated when location names exceeded 20 characters (ID#131).
• IReporter files are now compressed by default (ID#125).

Known Issues and Limitations

CServer:

• Manual installations, over slow connections causes the install window to not be properly painted while the installation is in progress. Clicking on the window behind the installation window may cause CServer to lockup (ID#110).
• Synchronization of code data to iCounter clients from Cserver is disabled in this release (ID#109).

iCounterCE (all platforms):

• No known issues.

iCounterXP:

• No known issues.

iReporter:

• Some unsupported reports do not pop up a message box indicating the report is unsupported (ID#104).
• If a count is renamed in Cserver this new name is not reflexed in iReporter (ID#103).

Additional Information